ໜ້າ ທີ່ໂຄງສ້າງຂອງເຄື່ອງສີດ

ໜ້າ ທີ່ໂຄງສ້າງຂອງເຄື່ອງສີດປະກອບດ້ວຍລະບົບສີດ, ລະບົບ ໜີບ, ລະບົບສາຍສົ່ງໄຮໂດຼລິກ, ລະບົບຄວບຄຸມໄຟຟ້າ, ລະບົບຫລໍ່ລື່ນ, ລະບົບ ທຳ ຄວາມຮ້ອນແລະຄວາມເຢັນ, ແລະເຄື່ອງສີດລະບົບຕິດຕາມກວດກາ.
1. ລະບົບສີດ
One of the main components of the ເຄື່ອງສີດ is the main camera system. Plunger type, screw type and screw pre-plasticized plunger type are usually three types of injection systems. The screw type is widely used. The injection system is composed of a plasticizing device and a power transmission device. Injection cylinder, injection seat moving cylinder and screw

2. ການຄວບຄຸມໄຟຟ້າ
ເຄື່ອງໃຊ້ໄຟຟ້າ, ສ່ວນປະກອບເອເລັກໂຕຣນິກ, ແມັດ, ເຄື່ອງເຮັດຄວາມຮ້ອນ, ເຊັນເຊີ, ແລະອື່ນ etc. ລວມກັນເປັນເຄື່ອງຄວບຄຸມໄຟຟ້າ, ແລະໂດຍປົກກະຕິແລ້ວມີສີ່ຮູບແບບການຄວບຄຸມຄື: ຄູ່ມື, ເຄິ່ງອັດຕະໂນມັດ, ອັດຕະໂນມັດເຕັມຮູບແບບແລະການປັບປ່ຽນ. ຄວາມຕ້ອງການຂອງຂະບວນການ (ຄວາມກົດດັນ, ອຸນຫະພູມ, ຄວາມໄວ, ເວລາ) ແລະການກະທໍາຕ່າງ program ຂອງໂປຣແກມເຄື່ອງສີດສາມາດຮັບຮູ້ໄດ້ໂດຍການຈັບຄູ່ສົມເຫດສົມຜົນລະບົບຄວບຄຸມໄຟຟ້າແລະລະບົບໄຮໂດຼລິກ.

3. ເຄື່ອງເຮັດຄວາມຮ້ອນ/ຄວາມເຢັນ

Heating the barrel and the injection nozzle is the main purpose of the heating system. The heating device of the barrel of the ເຄື່ອງສີດ usually uses an electric heating coil, which is installed externally, and uses an electric thermocouple to detect in sections. The heat source of material plasticization is provided by the heat conduction of the cylinder wall. Excessive oil temperature will cause multiple failures. Therefore, it is the main purpose of controlling the oil temperature and cooling the oil temperature. Near the feeding port of the feed pipe is another place that needs to be cooled to avoid melting of the raw materials at the feeding port, which will cause the raw materials to fail to be fed normally.

4. ລະບົບນໍ້າມັນ
A loop gastric lubrication system that provides lubrication conditions at the relative moving parts of the ເຄື່ອງສີດ's movable template, mold adjusting device, connecting rod hinge, injection platform, etc., so that energy consumption is reduced and the life of parts is increased, whether it is automatic electric Or regular manual lubrication is acceptable.

5. ເຄື່ອງສີດຕິດຕາມກວດກາ

ອຸປະກອນທີ່ໃຊ້ເພື່ອປົກປ້ອງຄົນແລະເຄື່ອງຈັກແມ່ນອຸປະກອນຫຼັກຂອງເຄື່ອງສີດ. Doors, baffles, hydraulic valves, limit switches, and photoelectric detection components are the main components, enabling the realization of the electric-mechanical-hydraulic interlocking protection. The oil temperature, material temperature, system overload of the ເຄື່ອງສີດ, as well as process and equipment failures are detected, and the main function of the system to indicate abnormal conditions or alarm is not detected.